K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
Power Steering Line/Hose: Service and Repair
Power Steering Cooler Pipe/Hose Replacement
Without Hydroboost
POWER STEERING COOLER PIPE/HOSE REPLACEMENT (WITHOUT HYDROBOOST)
REMOVAL PROCEDURE
1. Remove the front grille.
2. Remove the clamp retaining the power steering outlet hose (3) from the power steering gear (4).
NOTE: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
3. Remove the clamp retaining the power steering inlet hose from the power steering pump (5).
4. Remove the bolts (2) retaining the power steering cooler from the radiator support.
5. Remove the power steering cooler from the vehicle.
INSTALLATION PROCEDURE