K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
Front Door Window Regulator: Service and Repair
Front Side Door Window Regulator Motor Replacement
Front Side Door Window Regulator Motor Replacement
Removal
1. Raise the window.
If the window motor is inoperable, remove the window to gain access to the window motor retaining screws. Refer to Front Side Door Window
Replacement.
2. Remove the power window module. Refer to Front Side Door Window Module Replacement
3. With the window regulator on the bench, remove fasteners one (1) and two (2) which will disconnect the drive housing and motor (4) from the rail
(5).
Important: Do not allow cable gear/spool to come out of the housing. As the motor slides out of the gear/spool, hold the gear/spool into the
housing with your fingers. The spool will unwind if it comes out of the housing.
4. Holding the motor and housing together, remove fastener three (3).
5. Slide the motor partially out of the gear/spool allowing finger access to the gear spool (6). Hold the gear/spool into the housing and remove the
motor (7).