K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
1. Install the SDM (3) to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions
2. Install the SDM mounting fasteners.
Tighten
Tighten fasteners to 10 N.m (89 lb in).
3. Connect the SDM wiring harness connector (1) to the SDM.
4. Push down the flex lock button (3) and slide the connector locking cover (4) to the close position.
5. Install the connector position assurance (CPA) (1) to the inflatable restraint sensing and diagnostic module (SDM) wiring harness connector (2).
6. Position the carpet to cover the inflatable restraint sensing and diagnostic module (SDM).
7. Install the door sill plate.
8. Install the driver seat.
9. Enable the SIR system.
