K 1500 Yukon XL 4WD V8-5.3L VIN T (2001)
1. Working from side to side, carefully install the seat back cover over the foam pad.
2. Remove the cardboard from between the seat back cover and the foam pad.
3. Engage the hook and the loop strips that retain the seat back cover to the seat back foam pad.
4. Secure the bottom edge of the seat back cover.
5. Install the head restraints to the seat back.
6. Install the armrest to the seat back.
Rear Seat Back Cushion Cover and Pad Replacement (40 Percent Split)
Rear Seat Back Cushion Cover and Pad Replacement (40 Percent Split)
Removal Procedure
1. Remove the seat back folding cover.
2. Remove the head restraints (2) from the seat back.
3. Remove the J-clips from the seat.
4. In order to ease removal, place a piece of cardboard between the seat back cover and the foam pad.
5. Working from side to side, carefully lift the seat back cover from the foam pad.
Installation Procedure
1. Working from side to side, carefully install the seat back cover over the foam pad.
2. Remove the cardboard from between the seat back cover and the foam pad.
3. Install the J-clips to the seat.
4. Install the head restraints (2) to the seat back.
5. Install the seat back folding cover.
Rear Seat Back Cushion Cover and Pad Replacement (60 Percent Split)
Rear Seat Back Cushion Cover and Pad Replacement (60 Percent Split)
Removal Procedure
1. Remove the armrest from the seat back.