K 1500 Yukon XL 4WD V8-8.1L VIN G (2001)
14. Remove the starter lead nut.
15. Remove the positive cable from the starter.
16. Remove the positive cable clip nut.
17. Remove the positive cable from the engine harness clip.
18. Remove the positive battery cable.
INSTALLATION PROCEDURE
1. Install the positive battery cable.
2. install the positive cable to the engine harness clip.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the positive cable clip nut.
Tighten
Tighten the positive cable clip nut to 8 N.m (71 lb in).
4. Install the positive cable to the starter.
5. Install the starter lead nut.
Tighten
Tighten the starter lead nut to 9 N.m (80 lb in).