K 2500 Suburban 4WD V8-350 5.7L (1994)
Ignition Timing Connector: Technical Service Bulletins
Ignition - Timing Connector Location Change
Group Ref.: Engine
Bulletin No.: 366002
Date: January, 1994
INFORMATION
SUBJECT:
TIMING CONNECTOR LOCATION CHANGE
MODELS:
1994 CHEVROLET AND GMC C/K TRUCKS WITH GASOLINE ENGINES
The timing connector, which can be disconnected to return engine timing to base for adjustment purposes, has been moved from the engine compartment
to inside the cab. This new location is not currently reflected in the Service or Owner's Manual.
The new location is under the dash directly below the glove compartment. The tan/black wire is routed for a short distance outside of a large wiring
harness. This large harness is routed between the heater blower motor and evaporator case. The timing connector is taped to the wire bundle (Figure 1).