K 2500 Suburban 4WD V8-5.7L VIN R (1999)
Oil Pressure Sensor: Service and Repair
REMOVAL PROCEDURE
-
Tools Required
-
J 41712 Oil Pressure Switch Socket
1. Disconnect the electrical connector.
2. Hold the engine oil pressure sensor fitting with a wrench.
IMPORTANT: Note the alignment of the oil pressure sensor fitting prior to removal.
3. Remove the engine oil pressure sensor using J 41712.
4. Remove the engine oil pressure sensor fitting, if necessary.
INSTALLATION PROCEDURE
NOTICE: Fastener Notice in Service Precautions.