K 2500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1996)
Clutch Slave Cylinder: Service and Repair
Concentric Slave Cylinder
REMOVE OR DISCONNECT
1. Transmission, refer to Manual Transmission/Transaxle / Service and Repair.
2. Bolts securing the concentric slave cylinder to the clutch housing shaft.
3. Slave cylinder from the transmission input shaft.
4. Bearing from slave cylinder.
INSTALL OR CONNECT
1. Bearing to slave cylinder.
2. Slave cylinder to the transmission input shaft. Ensure that the bleed screw and coupling are positioned with the transmission ports.
3. Two bolts securing the concentric slave cylinder to the clutch housing shaft and tighten to 8 Nm (71 lb in).
4. Transmission.