K 2500 Truck 4WD V8-350 5.7L VIN K TBI (1995)
Auxiliary Heater Module
Install or Connect
1. Heater core.
2. Heater case cover.
3. Blower motor, if necessary.
4. Heater module.
5. Nuts.
6. Bolts.
Tighten
-
Nuts to 10 Nm (89 lb in).
-
Bolts to 1.5 Nm (13 lb in).
7. Drain valve.
8. Electrical connectors, as necessary.
9. Auxiliary heater hoses to heater core.
10. Right rear wheelhouse.
11. Right rear quarter trim panel.
12. Engine coolant.
-
Check the system for leaks.