K 2500 Truck 4WD V8-350 5.7L VIN K TBI (1995)
Alignment: Specifications
Alignment Specifications
Caster, Degrees
Checking [01] .................................................................................................................................................................................................... 3.0 +/- 1.0
Setting [02] ........................................................................................................................................................................................................ 3.0 +/- 1.0
Camber, Degrees
Checking [01] .............................................................................................................................................................................................................. 0.65
Setting [02] .................................................................................................................................................................................................................. 0.65
Toe-In, Degrees
Checking [03] .................................................................................................................................................................................................. 0.24 +/- 0.2
Setting [03] ....................................................................................................................................................................................................... 0.24 +/- 0.2
Ball Joint Wear, inches [04] ............................................................................................................................................................................................ 0.08
Note: Caster angle must be corrected to level frame angle.
[01] Left and right side should be equal within +1.0 deg.
[02] Left and right side should equal within +0.5 deg.
[03] Toe-in left and right side to be set equally per wheel and steering wheel must be held in straight ahead position within +/-5.0 deg.
[04] Refer to /Steering & Suspension/ Ball Joint Inspection for inspection procedure.