K 2500 Truck 4WD V8-350 5.7L VIN K TBI (1995)
Catalytic Converter: Service and Repair
Three-Way Converter Replacement
REMOVE OR DISCONNECT
-
Raise the vehicle.
1. Clamps at the front and rear of the three-way catalytic converter.
2. Three-way catalytic converter to front exhaust pipe and three-way catalytic converter to intermediate exhaust pipe.
3. Three-way catalytic converter.
INSTALL OR CONNECT
1. Three-way catalytic converter into the exhaust pipe.
2. New U-bolts and clamps at the front and rear of the three-way catalytic converter. Tighten nuts to 60 Nm (44 lbs. ft.).
^
Check for clearance and alignment.
^
Lower the vehicle.