K 2500 Truck 4WD V8-350 5.7L VIN K TBI (1995)
![background image](/gmc/k_2500_truck_4wd/v8-350_5.7l_vin_k_tbi/Page-1362001.png)
Band Apply Servo: Service and Repair
Turbo Hydra-Matic 4L60-E
1. Raise and support vehicle.
2. Remove two oil pan bolts from below servo cover.
3. Install servo cover compressor tool No. J-29714 or equivalent on oil pan flange and depress servo cover.
4. Remove servo cover retaining ring.
5. Remove servo cover and seal ring.
6. Remove servo piston and bore-apply pin assembly.
7. Reverse procedure to install. Whenever any servo parts are replaced, apply-pin length must be checked.