K 2500 Truck 4WD V8-350 5.7L VIN K TBI (1995)
4.
Rotate the lever assembly on the side of the transmission fully forward into Park position as shown in Figure 5.
5.
Press the lock button to the looked position as shown in Figure 1.
-
Clean the adjuster body as necessary.
6.
Install the clip as shown in Figure 2.
-
There may be adhesive on the adjuster body as shown in Figure 3. If the adhesive interferes with clip installation, remove the adhesive with a
knife or sharp tool.
7.
Lower the vehicle.
8.
With the key in the On position, move the shift lever to engage each transmission detent position (P, R, N, O/D, D, 2, 1) and verify the proper shift
indicator light comes on for each position.
9.
Install the Campaign Identification Label.
Parts & Warranty Information
PARTS INFORMATION
Parts are to be obtained from General Motors Service Parts Operation (GMSPO). To ensure that these parts will be obtained as soon as possible, they
should be ordered from GMSPO on a C.I.O. order with no special instruction code but order under an advise code (2). All Goodwrench parts system test
dealers should order on a "VIP" order.
Part Number
Description
Quantity
15726588
Retainer, Shift Cable
1
WARRANTY INFORMATION
Dealers should submit an accurately filled out Warranty Repair Order on each vehicle completed under this campaign.
Campaign ID Label