K 2500 Truck 4WD V8-379 6.2L DSL (1988)
Wheels: All Technical Service Bulletins
Wheels - Nylon Coated Wheel Weights
GMC NUMBER:
88-T-10
GROUP:
3E - Wheels & Tires
DATE:
April, 1987
CORPORATE
NUMBER:
863501
SUBJECT:
NYLON COATED WHEEL WEIGHTS
MODELS:
1988 C/K MODEL TRUCKS WITH CAST ALUMINUM WHEELS
1988 C/K model trucks equipped with cast aluminum wheels now use new nylon coated clipon wheel weights. These balance weights provide a much
better appearance and are used on both the outboard and inboard rim flanges. They will not discolor, corrode, or damage the wheel, as may have been the
case in the past with uncoated clipon weights used on aluminum wheels. These nylon coated balance weights will fit most GM cast aluminum wheels and
are available for service
through GMSPO. They are available in 1/4 ounce increments ranging from 1/4 ounce to 3 ounces, P/N 9591358 through P/N 9591369 inclusively. When
installing the coated weights, care must be taken so that the nylon coating does not crack. It is recommended that a Teflon hammer be used, such as
85403 Nicholson Industrial Hammer (or equivalent), available through the Charles Strelinger Company, Warren, Michigan (313-268-4100).