gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Interior Door Handle - Spring Breaks|Page 7401 > < Door Handle, Exterior - Broken|Page 7392
Page 1
background image

Front Door Interior Handle: Customer Interest
Interior Door Handle - Spring Breaks

FILE IN SECTION: 10 - Body 

BULLETIN NO.: 56-16-03

DATE: July, 1995

SUBJECT:
Interior Door Handle Spring Breaks (Replace Pin and Spring)

MODELS:
1988-94 Chevrolet and GMC Truck C/K Models
1990-95 TopKick/Kodiak Models

CONDITION

The spring for the interior door handle may fatigue and break. In the past, the door control switch panel assembly had to be replaced. A spring repair kit
was not available from GMSPO.

CAUSE

Frequent use.

CORRECTION

Replace the pin and spring, using a new spring kit.

SERVICE PROCEDURE

1.

Disconnect the negative battery cable.

2.

Vehicles without power locks and/or windows, remove the door control switch panel assembly (Figure 1, Item 1) from the interior door panel.
Vehicles equipped with power locks and/or windows, remove the door control switch panel (Figure 1, Item 1) and disconnect the electrical
connector.

Interior Door Handle - Spring Breaks|Page 7401 > < Door Handle, Exterior - Broken|Page 7392