gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Endgate <--> [Trunk / Liftgate] > < Paint - Flaking On Hood, Replace Hood
Page 1
background image

Hood: All Technical Service Bulletins
Paint - Flaking On Hood, Replace Hood

GMC NUMBER:

89-T-12

GROUP:

10 - Body Section

DATE:
January, 1989

CORPORATE
NUMBER:

861003R

SUBJECT:

HOOD PAINT FLAKING

MODELS:

1989 C/K 1, 2, 3

Hood paint flaking or adhesion may be experienced on some 1989 C/K trucks within the breakpoints listed. This condition was caused by an improper
galvanizing process. The flaking condition to bare metal will be most noticeable on the edges of the hood. Hoods that were built within the suspect time
period may be identified by the number 39 stamped in the right edge approximately 16 inches from the front of the hood. If paint flaking occurs on a
hood with a number 39 stamped in the right edge and the VIN is within the breakpoints listed, the hood must be replaced and refinished. Do not attempt
to refinish the original hood. Order Hood P/N 15611248. Parts are currently available from GMSPO.
VIN within the following breakpoints are suspect:

Start

Stop

Pontiac East

GMC

1GTGK34N8KE505893 1GTFC24K7KE506147

Chevrolet

1GCJC34K0KE117885

1GCFC24H9KE122469

Fort Wayne
GMC

1GTDC14K0KZ507280 1GTDC14K5KZ508246

Chevrolet

1GCDC14K2KZ124201 1GCDC14K1KZ127235

Oshawa
GMC

2GTEC14K6K1508057

2GTGK29K5K1509338

Chevrolet

2GCDC14H1K1118094 2GCDC14H8K1120392

When replacing hood under warranty for the above reason, use:

*

Labor Op:     T7795

*

Labor Time: 2.7 Hrs.

Material Allowance:

$38.55

*

Includes paint mix time.

Endgate <--> [Trunk / Liftgate] > < Paint - Flaking On Hood, Replace Hood