K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
SERVICE PROCEDURE:
1.
Remove door trim panel.
2.
Remove door module and window.
3.
Remove outside handle rod from rod clip.
4.
Remove lock cylinder rod from lock cylinder clip.
5.
Remove outside handle mounting screws.
6.
Remove door lock cylinder from the outside handle housing.
7.
Remove door handle assembly.
8.
Install revised door handle assembly (P/N 15686155 LH or 15686156 RH).
9.
Install door lock cylinder to the outside handle housing.
10.
Install lock cylinder rod to the lock cylinder clip.
11.
Install handle rod to the handle assembly clip.
12.
Install outside handle mounting screws.
13.
Install door module and glass.
14.
Install door trim panel.
SERVICE PARTS INFORMATION
Part
Description
Quantity
Number
15686155
Handle Assembly-Frt.
1
Outside Door LH
15686156
Handle Assembly-Frt
1
Outside Door RH
Parts are expected to be available on October 21, 1991. In case of limited inventory, parts will be placed on 400 control to waive VIP surcharges. Only
verifiable emergency orders will be accepted. SPO will make every effort to obtain parts. However, the part will be shipped premium transportation at
the dealer's expense and all other order types will be placed on backorder until the 400 control is removed.
WARRANTY INFORMATION
For vehicles repaired under warranty use:
Labor
Description
Labor
Operation
Time
B4120
Right Handle, Front Door
0.7 hrs.
Outside-Replace
B4121
Left Handle, Front Door
0.7 hrs.
Outside-Replace
