gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Fiber Glass Rear Fender Paint - Star Shaped Crack|Page 8056 > < Warranty - Rail Dust Removal & Chemical Spotting Labor
Page 1
background image

Paint: All Technical Service Bulletins
Fiber Glass Rear Fender Paint - Star Shaped Crack

File In Section: 10 - Body 

Bulletin No.: 66-15-09A

Date: April, 1997

Subject: 
Fiber Glass Rear Fender Paint Star Shaped Cracks (Install Protective Liner)

Models: 
1988-97 Chevrolet and GMC C/K Models 
with RPO E62 or R05

This bulletin is being revised to add 1997 models. Please discard Corporate Bulletin Number 66-15-09 (Section 10 - Body) 

Condition

Some customers may report star shaped cracks in the paint on fiber glass rear fenders.

Cause

Star shaped cracks in the paint finish are caused by the impact of rocks flung out of the tire treads against the inside of the fiber glass fender.

Correction

Install protective fender liner. The liner is a special polymer layer with an aluminum foil backing that is applied to the inside of the fenders.

Service Procedure

The inner fender must be clean, dry, and the temperature must be above 45°F. Power washing may be necessary. Any after market undercoating must be
removed.

Caution: 

To prevent cuts and abrasions on your hands from sharp aluminum foil edges, gloves should be worn during this service procedure.

Fiber Glass Rear Fender Paint - Star Shaped Crack|Page 8056 > < Warranty - Rail Dust Removal & Chemical Spotting Labor