K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Installing Inner Pad
3. Using a screwdriver to disengage the buttons on the pad from the holes in the caliper housing, remove the outer pad.
4. Remove inner pad.
5. Remove mounting bolt boots seals and bushings.
Installation
Caliper Assembly
1. Lubricate new sleeves, rubber bushings, bushing grooves and mounting bolt ends with Delco Silicone Lube or equivalent.
2. Install new bushings.
Installing Inner Pad
3. Install inner pad by snapping the retainer spring, (staked to the inner pad), into the piston.
