K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Removing The Clutch Plate & Hub Assembly
2. Clutch plate and hub assembly (2).
^
Thread J 9401-A into the clutch plate and hub (2).
^
Hold the body of J 9401 with a winch and tighten the center screw into the remover body.
3. Shaft key (36).
^
Retain the shaft key (36) if usable.
Inspect
^
All parts and replace as necessary.
Install or Connect
Tools Required:
J 9399 Compressor Shaft Nut Socket
J 9480-B Hub and Drive Plate Assembly Installer
J 25030 Clutch Hub Holding Tool
1. Shaft key (36).
