K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Installing The Pulley Rotor Bearing
2. Pulley bearing (4) into the hub using J 29886, J 9481-A and J 21352-A.
Staking The Pulley Bearing In The Rotor Bore
^
J 33019 in the pulley bore.
^
Seat the pulley and bearing assembly on J 21352-A to support to the hub under the staking pin location.
^
Strike the staking pin with a hammer until a metal stake, similar to the original, is formed down to, but not touching the bearing.
-
Position the stake pin after striking.
-
The staked metal should not contact the outer race of the bearing to prevent the possibility of bending the outer race.
Bearing Stake Locations
-
Stake 3 places 120° apart.
