K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Installing The Clutch Coil Assembly
^
Thread through bolts into J 33026 to full fixture thickness.
^
Be sure J 8433-1 and the clutch coil assembly (6) stay "in line" during installation.
Staking The Clutch Coil Assembly To The Coil Head
^
When the clutch coil assembly (27) is seated on the front head (11), use a 3 mm (1/8 inch) diameter drift punch to slake the head (33) at 3
places, 120° apart to assure the clutch coil assembly (6) remains in position.
Clutch Coil Staking Locations
-
Stake size should be one halt the area of the punch tip and 0.28-0.35 mm (0.010-0.015-inch) deep.