K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Compressor Component View
Remove or Disconnect
Tools Required:
J 6083 External Snap Ring Pliers
J 25031 Rotor and Bearing Puller
J 9398-A Rotor Bearing Remover
J 29886 Driver Handle
Removing The Retaining Ring
1. Snap ring with J 6083.
^
Mark the location of the clutch coil terminals.
Important
^
If only the clutch rotor and/or rotor bearing are to be replaced, bend the screw head washer away from the pulley tim and remove the six
mounting screws and washers. If the clutch coil or pulley rim is to be removed leave the screws in place.
