K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Compressor Shaft Seal
Remove or Disconnect
Tools Required:
J 5403 Internal Snap Ring Pliers
J 9553-01 O-Ring Seal Remover:
J 23128-A Seal Remover and Installer
J 34614 Shaft Seal Protector
1. Clutch plate and hub assembly (22).
Removing Or Installing The Shaft Seal Retainer
2. Shaft seal retainer ring using J 5403.
^
Clean the compressor neck area around the shaft (38), the exposed part of the shaft seal (29) and the O-ring seal groove. Any dirt or foreign
material getting into the compressor may cause damage.
Removing Or Installing The Shaft Seal
3. Shaft lip seal using J 23128-A.
^
Install J 34614 over the threaded end of the shaft (20).
^
Insert J 23128-A into the shaft lip seal, tighten and remove lip seal.
