gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

A/C - Retrofitting R-12 to R-134a|Page 6909 > < A/C - Retrofitting R-12 to R-134a|Page 6907
Page 19
background image

Adapter, High Side - 91172093

0-Rings:

Compressor - Small (6) - 91172095
Large - 96068915

Receiver/dryer (2) - 96068488

Suction hose - 96068490

Discharge hose - 96068489

Suction hose - 91172091

Discharge hose - 91172085

1985-89 Spectrum and 1990-93 Storm (R)

1.

Using the Service Manual, remove the following components in the order given:

a.

Condenser (Storm) or radiator grille (Spectrum) (to be reinstalled).

b.

Triple switch (Storm) or dual pressure switch (Spectrum) (to be reinstalled).

c.

Receiver/dryer.

d.

Evaporator to compressor (suction) pipe.

e.

Check valve from high side service valve (discard).

f.

Compressor (only if being replaced).

2.

Using the Service Manual, install the following components in the order given. Be sure to use new 0-rings whenever a refrigerant connection has
been disconnected.

a.

Compressor (if being replaced).

b.

High side adapter fitting (see Step 3 of the retrofit procedure for detailed installation instructions). Low Side - Part of suction hose

c.

Evaporator to compressor (suction) pipe, and new 0-rings.

d.

Receiver/dryer and 0-rings.

e.

Triple switch or dual switch, and new 0-ring.

f.

Condenser or radiator grille.

R-134a amount:

91 - 500 grams (1.10 lb) 

92-93 - 600 grams (1.32 lb)

PAG oil amount:

150 cc (4.50 oz)

Parts Required:

Receiver/dryer:

85-89 - 97104795

90-91 - 97104797

92-93 - 97104798

Adapter, High Side:

A/C - Retrofitting R-12 to R-134a|Page 6909 > < A/C - Retrofitting R-12 to R-134a|Page 6907