K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
a. A down in rear frame angle must be subtracted from a positive caster reading.
b. An up in rear frame angle must be added to a positive caster reading.
c. A down in rear frame angle must be added to a negative caster reading.
d. An up in rear frame angle must be subtracted from a negative caster reading.
8.
If the caster angle is incorrect, correct the caster angle by turning the adjustment cam bolts.
CAMBER
1.
Determine the camber from the alignment equipment.
2.
Install adjustment kit No. 15538596, or equivalent.
3.
Reset camber to specifications.
Front Toe Adjustment
1.
Determine toe-in from the alignment equipment.
2.
Change length of both tie rod sleeves to effect a toe change.
3.
Toe-in can be increased or decreased by changing the length of the tie rod ends. A threaded sleeve is provided for this purpose. When the tie rod
ends are mounted ahead of the steering knuckle they must be decreased in length in order to increase toe-in. When the tie rod ends are mounted
behind the steering knuckle they must be lengthened in order to increase toe-in.
