K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Fig. 2 Exploded View Of Eaton Locking Differential
1.
Remove guide clips and clutch discs from gear keeping components in order.
2.
Clean and inspect components, and replace as needed. If side gear shim is defective, it must be replaced with one of equal thickness. If side
gear is replaced, and/or if side gear shim thickness cannot be determined, perform SIDE GEAR SHIM SELECTION procedure.
3.
Install eared and splined clutch discs on side gear, starting with eared disc as shown in Fig. 2. If components are reused, they must be installed in
original position.
4.
Install selected shim on side gear.
