K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Constant Velocity Joint: Service and Repair
Outer CV Joint Replacement
Disassemble
Tool Required:
J 8059 Snap Ring Pliers (or equivalent)
1. Clamps (174 and 183). Cut to remove.
2. Snap ring (184). Use J 8059 (or equivalent).
3. Joint assembly from the axle shaft (182).
4. Balls (185).
^
Using a brass drift and hammer, tap on the cage (171) until it tilts enough to remove the first ball.
^
Remove the other balls in the same manner
5. Cage (171) from the outer race (170).
^
Pivot the cage with inner race (172) 90-degrees to the center line of the outer race.
^
Align the cage windows (B) with the lands (A) of the outer race.
^
Lift Out the cage with the inner race.