K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Figure 2
Disassembly of the Transfer Case After Removal from Vehicle
*
Clean the transfer case using a solvent and a stiff brush
Remove (Figures 1 & 2)
1.
Front output flange nut (77), washer (76), rubber sealing washer (75) and front output flange
(74) from the front output shaft.
2.
Indicator lamp switch (46) and O-ring seal (47).
3.
Speedometer sensor (9) and seal.
4.
Poppet screw (68), O-ring seal (69), poppet plunger (70) and poppet spring (71).
