K 2500 Truck 4WD V8-379 6.2L DSL VIN J FI (1985)
Fig. 9 Exploded view of Warner manual locking hub
Removal
1.
Remove socket head screws, axle hub retaining ring and axle shaft retaining ring.
2.
Remove hub clutch assembly, Fig. 9.
3.
Clean and inspect all components. Replace as necessary.
Installation
1.
Lubricate all hub components.
2.
Install hub clutch, axle hub retaining ring and axle shaft retaining ring.
3.
Install new O-ring in hub body and position in clutch.
4.
Install socket head screws and torque to 30 inch lbs.
5.
Raise and support front of vehicle, then set control dial to ``FREE'' position and rotate wheels. If wheels drag, check hub installation.
6.
Lower vehicle.