K 2500 Truck 4WD V8-454 7.4L VIN J SFI (1997)
Hub, Knuckle, And Control Arm Components
1. Install the hub/rotor to the hub and bearing assembly.
2. Install the rotor and hub assembly to the axle.
^
Tighten the bolts to 180 Nm (133 ft. lbs.).
^
Tighten the nut to 225 Nm (165-173 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the brake caliper.
4. Install the tire and wheel assembly.
5. Lower the vehicle.
6. Depress the brake pedal.
