K 2500 Truck 4WD V8-454 7.4L VIN J SFI (1997)
Crankshaft: Service and Repair
Reluctor Ring, Replacement
^
Tools Required
-
J 22102 Crankshaft Sprocket Installer
-
J 41371 Reluctor Wheel Remover
-
Or Equivalents
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the air cleaner intake duct.
3. Remove the engine cooling fan. Refer to Cooling System.
4. Remove the water pump. Refer to Cooling System.
5. Remove the engine front cover.
6. Remove the crankshaft position sensor reluctor ring using the reluctor wheel remover.
INSTALLATION
1. Install the crankshaft position sensor reluctor ring using a crankshaft sprocket installer.
2. Install the engine front cover.
3. Install the water pump. Refer to Cooling System.
4. Install the engine cooling fan. Refer to Cooling System.
5. Install the air cleaner air duct.
6. Connect the negative battery cable.