K 2500 Truck 4WD V8-5.3L VIN T (1999)
Seat Cushion: Service and Repair
Seat Cushion Cover and Pad Replacement - Rear
REMOVAL PROCEDURE
1. Remove the rear seat.
2. Release the clip on the rear of the seat cushion and pull back the trim cover far enough to expose the side bolts (2).
3. Remove the cushion side bolts.
4. Disconnect the seat pull strap cable (3).
5. Remove the cushion from the seat.
6. Using a side motion, pull the remainder of the trim cover off the cushion.
7. Separate the foam pad from the cushion frame.
INSTALLATION PROCEDURE