K 2500 Truck 4WD V8-5.3L VIN T (1999)
Brake Pedal Assy: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Disable the SIR.
3. Disconnect the electrical connection from the stoplamp switch.
4. Remove the pushrod retaining clip (4).
5. Remove the stoplamp switch (2).
6. Remove the pushrod (3) from the brake pedal stud (1).
7. Remove the brake pedal bolt nut.
8. Remove the brake pedal bolt.
9. Remove the brake pedal.
INSTALLATION PROCEDURE
1. Install the brake pedal.