K 2500 Truck 4WD V8-5.3L VIN T (1999)
5. Connect the purge solenoid vent tube to the purge solenoid. Refer to EVAP Canister Purge Solenoid Valve Replacement in Powertrain
Management.
NOTICE: Refer to Fastener Notice in Service Precautions.
6. Install the engine electrical harness and nut.
-
Tighten the nut to 10 Nm (89 inch lbs.).
7. Route the harness over the engine, then install the following connectors.
-
EVAP
-
TP
-
MAP
-
Fuel pipes
-
IAC
-
Eight fuel injector connectors