gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Heating and Ventilation|Page 11237 > < Heating and Ventilation|Page 11235
Page 6
background image

1. Install the rear floor air duct.

2. Install the rear floor ducts from the floor studs.
3. Roll the carpeting back into place. Refer to Carpet Replacement - Front in Interior Trim.
4. Install the heater/ventilation module.
5. Install the seats.
6. Install the floor console.

Air Outlet Replacement - Side Window

REMOVAL PROCEDURE

1. Remove the Instrument Panel (IP) carrier.
2. Remove the air tube from the side window outlet duct.
3. Remove the side window air outlet duct.

Heating and Ventilation|Page 11237 > < Heating and Ventilation|Page 11235