K 2500 Truck 4WD V8-5.3L VIN T (1999)
3. Install the tie rod seal (2) to the outer tie rod assembly (1).
4. Connect the hexagon torque prevailing nut (3) to the outer tie rod stud (1).
NOTICE: Refer to Fastener Notice in Service Precautions
-
Tighten the hexagon torque prevailing nut (3) to 00 Nm (00 ft. lbs.).
Adjust toe by turning the inner tie rod. Follow recommended manufacturer specifications; refer to Front Toe Adjustment under Alignment.
IMPORTANT: Be sure the rack and pinion boot is not twisted or puckered during toe adjustment.
5. Tighten
-
Tighten the hexagon jam nut against the outer tie rod to 68 Nm (50 ft. lbs.).