K 2500 Truck 4WD V8-5.3L VIN T (1999)
1. Install the lower control arm.
2. Install the lower control arm bolts (15 Series).
3. Install the lower control arm bolts (25 Series).
4. Install the washers with the shoulder facing the arm
5. Install the nuts.
NOTICE: Refer to Fastener Notice in Service Precautions.
-
Tighten the nuts to 145 Nm (107 ft. lbs.).
6. Install the halfshaft.
7. Connect lower ball joint stud to the steering knuckle.
8. Install the nut to the ball joint stud.
-
Tighten the nut to 100 Nm (74 ft. lbs.).
9. Install the torsion bars.
