K 2500 Truck 4WD V8-6.0L VIN U (1999)
6. Tighten the nut to the intermediate cable at the equalizer.
-
Tighten the nut to 3.5 Nm (31 inch lbs.).
7. Remove the safety stands.
8. Lower the vehicle.
9. Connect the park brake release cable to the park brake lever.
10. Connect the park brake warning lamp connection.
11. Install the left side hinge pillar panel.
12. Install the left side kick panel.
13. Connect the negative battery cable.
-
Tighten the nuts to 17 Nm (13 ft. lbs.).
