K 2500 Truck 4WD V8-6.0L VIN U (1999)
1. Install exhaust hanger bracket.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the exhaust hanger bracket bolts (2) (automatic transmission).
^
Tighten the exhaust hanger bracket bolts to 12 Nm (106 inch lbs).
3. Install the exhaust hanger bracket bolts (manual transmission).
^
Tighten the exhaust hanger bracket bolts to 14 Nm (10 ft. lbs.).
4. Install the front pipe. Refer to Front Pipe Replacement (System B 6.0L).
5. Install the catalytic convertor. Refer to Catalytic Converter Replacement (Heavy Duty-6.0L).
6. Install the rear exhaust system. Refer to Rear Exhaust System Replacement (Heavy Duty-6.0L).
7. Install the protective shields as necessary.
8. Remove the safety stands.
9. Lower the vehicle.