K 2500 Truck 4WD V8-6.0L VIN U (1999)
REMOVAL PROCEDURE
1. Remove the Instrument Panel (IP) bezel.
2. Remove the air outlet housing from the IP carrier.
3. Disconnect the electrical connections as necessary.
4. Remove the air outlet housing.
5. Remove the air outlet from the housing assembly.
6. Transfer the switch assemblies as necessary.
INSTALLATION PROCEDURE
1. Install the air outlet to the housing assembly.
2. Connect the electrical connections as necessary.
3. Push the air outlet housing into the IP carrier until the outlet housing snaps into place.
4. Install the IP bezel.
Right Center
REMOVAL PROCEDURE
1. Firmly pull the air outlet to the left in order to release the outlet from the instrument panel.