K 2500 Truck 4WD V8-6.0L VIN U (1999)
REMOVAL PROCEDURE
1. Clean the pipe connections and the surrounding areas before disconnecting in order to avoid possible contamination of the EVAP system.
2. Disconnect the engine compartment EVAP pipe (2) at the EVAP canister purge solenoid (1).
3. Disconnect the engine compartment EVAP pipe (3) at the chassis EVAP pipe.
4. Remove the EVAP pipe from the engine.
INSTALLATION PROCEDURE
1. Install the EVAP pipe on the engine.
2. Connect the engine compartment EVAP pipe (3) to the chassis EVAP pipe.
3. Connect the engine compartment EVAP pipe (2) to the EVAP canister purge solenoid (1).