K 2500 Truck 4WD V8-6.0L VIN U (1999)
INSTALLATION PROCEDURE
1. Install the cruise control module to the vehicle.
2. Connect the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement. See: Cruise Control/Cruise Control
Servo Cable/Service and Repair/Cruise Control Cable Replacement
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the nuts in order to retain the cruise control module to the cowl.
Tighten
Tighten the nuts to 9 N.m (80 lb in).
4. Connect the electrical connector at the cruise control module.