K 2500 Truck 4WD V8-6.0L VIN U (1999)
Steering Gear Check Valve Replacement - Off Vehicle
DISASSEMBLY PROCEDURE
Remove the check valve (1) from the steering gear housing (2) using a small screwdriver.
IMPORTANT: Do not to damage the threads of the steering gear housing when removing the check valve.
ASSEMBLY PROCEDURE
Install the check valve (1) using a 3/8 inch diameter piece of tubing 100 mm (4 inches) long to drive into the steering gear housing (2).
Steering Gear Thrust Support Replacement - Off Vehicle
DISASSEMBLY PROCEDURE
-
Tools Required
-
J 42882 Adjuster Nut Socket
-
J 6222-A Shaft Seal Protector
-
J 43435 Adjuster Lock Nut Wrench