K 2500 Truck 4WD V8-6.0L VIN U (1999)
10. Remove the rack and pinion assembly mounting nuts (1), the washers (2) and the bolts (4).
11. Remove the rack and pinion assembly (3) from the vehicle.
INSTALLATION PROCEDURE
1. Install the rack and pinion assembly (3) into the vehicle.
2. Install the rack and pinion assembly mounting bolts (4), the washers (2) and the nuts (1).
NOTICE: Refer to Fastener Notice in Service Precautions.
-
Tighten the nuts to 150 Nm (110 ft. lbs.).
3. Install the intermediate shaft to the rack and pinion assembly.
4. Install the coupler clamp bolt to the intermediate shaft.