K 2500 Truck 4WD V8-6.0L VIN U (1999)
2. Using J 36502 install the rear output shaft seal.
3. Remove J 36502-2A from the output shaft.
4. Fill the space between the seal lips with grease GM P/N 1052497 or equivalent.
5. Install the rear propeller shaft. Refer to Propeller Shaft Replacement (Front Drive) in Propeller Shaft.
6. Check the transmission oil level. Refer to Fluid Replacement.
7. Lower the vehicle.
NV 4500
Removal Procedure
