K 2500 Truck 4WD V8-6.5L DSL Turbo VIN F (1994)
Coolant Level Indicator Lamp: Testing and Inspection
Indicator Lamp Remains Illuminated
1.
Turn ignition switch to the On position, then check coolant level and add coolant as necessary. If lamp remains illuminated, proceed to step 2.
2.
Disconnect electrical connector at the sensor. If lamp does not illuminate replace the sensor. If lamp remains illuminated, proceed to step 3.
3.
Connect electrical lead to the sensor and check for an open circuit between the sensor and the module. Repair or replace as necessary. If circuit is
satisfactory, replace the ECM.