K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Speaker: Service and Repair
Front Side Door
REMOVAL PROCEDURE
1. Remove the trim panel.
2. Remove the screws.
3. Use a small screwdriver in order to release the speaker retainer.
4. Remove the speaker.
5. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the speaker.
Snap the speaker into the retainer when the speaker is fully seated.
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the screws
Tighten
Tighten the screws to 2 N.m (18 lb in).
4. Install the trim panel.
5. Inspect the component's operation.