K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Brake Drum: Service and Repair
REMOVAL PROCEDURE
Construction of this drum and hub assembly does not allow replacement with the hub assembly installed on the vehicle.
1. Raise the vehicle on a hoist and support with suitable safety stands.
2. Remove the hub and drum assembly.
3. Remove the retaining bolts, stud nuts, or wheel studs.
4. Separate the drum, hub, and oil deflector.
5. Press the wheel studs out of the drum.
6. Replace parts as necessary.
INSTALLATION PROCEDURE
1. Connect the drum to the hub.
2. Align the drain holes.
3. Apply a light coating of sealing compound to the oil deflector contact surface.
4. Connect the oil deflector to the drum.
5. Install the retaining bolts, stud nuts, or wheel studs.
6. Press the wheel studs into the drum.