K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
1. Install the gasket.
2. Install the booster assembly.
3. Install the nuts.
^
Tighten the nuts to 36 Nm (26 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the stoplamp switch and pushrod.
5. Install the master cylinder and bracket.
6. Install the master cylinder nuts.
^
Tighten the nuts to 30 Nm (20 ft. lbs.).
7. Connect the return hose, steering gear, and inlet hoses.
8. Connect the negative battery cable.
9. Bleed the hydraulic booster system.